3 Step Process For Headlight Reconditioning
Use gloves provided and discard properly

Step 1: Green Decontamination Solution

Apply a liberal amount of Decontamination Solution to headlight or lens.  Using decontamination disc supplied in kit, apply light pressure when wiping over the lens. Do not allow solution to dry. PLEASE NOTE: on extreme surfaces use decontamination block supplied in kit, prior to using disc.

Step 2: Clear Adhesion Promoter

Apply a liberal amount of Adhesion Promoter to lint free blue cloths supplied in kit. Wipe surface of lens. Be sure to wipe sides and any raised areas.  

Step 3: Protective UV Coating

To prepare foam applicator for Protective UV Coating, pour on a few drops of adhesion promoter. Once foam applicator is moistened, lightly dip applicator into Protective UV Coating. Depending on lens, strokes may be applied horizontal or vertical. Continuous over-lapping is not necessary. 

PLEASE NOTE: Allow 30-45 minutes prior to driving vehicle to ensure lens is dry. In temperatures below 50 degrees, turn on headlights to help cure coating.
Select A Category Below For A  Price List

Ask About Close Out Specials!
Please ask salesperson for drum prices.
Special orders must be paid in
 full at time of order.
Terms: We accept Visa, Mastercard
and American Express.
Payable upon receipt.
Net 14 days with approved credit.
$35.00 Charge for N.S.F. checks.
Check  out of state shipping charges.
All export orders must be
paid in full prior to shipping.
*All Prices Subject To Change Without Notice

©AutoKare1.com 2006 *All  Rights Reserved
                                                                                                                                                             
©DragonsLairDesign.com 2006 * All Rights Reserved